The manufacturing of WEDM in China has always been dominated by high-speed WEDM, while the market of low-speed WEDM is more inclined to foreign products, such as Swiss and Japanese. This has also caused the so-called "low-end melee, high-end lost" situation in the domestic machinery manufacturing industry. We should treat this rationally. Because there is a market and demand, it is necessary to survive and develop at high speed; As a symbol of high-end wire cutting products, the low-speed wire cutting machine is still deeply involved by brands such as Su Sanguang in China, so a more accurate understanding of this situation should be due to the different product positioning and supply market.

First of all, WEDM, wire cut and WEDM all refer to WEDM machines. Fast-moving wire refers to the molybdenum wire walking back and forth, which saves molybdenum wire, but its accuracy is low, so it is generally used by domestic wire cutting machines. The middle wire is also a kind of WEDM machine tool. The principle is to use continuously moving molybdenum wire (called electrode wire) as electrode to remove metal and cut the workpiece by pulse spark discharge. Its wire speed and workpiece quality are between fast wire and wire cut, so it is called middle wire. To be precise, middle wire is an upgrade of fast wire, so it can also be called fast wire that can be cut many times, so its processing speed is close to that of fast wire, and its processing quality tends to wire cut. The wire feeding speed is between 1~12m/s, which can be adjusted as required. Wire cut wire cutting DK632A wire cut is an English abbreviation for WEDM-LS, which is to use continuous fast wire and tungsten-molybdenum alloy wire. Generally, it is only cut once, and the accuracy is not higher than 0.03. The finish is not good. Machine tools can be bought for 30 thousand. Low processing. 2 slow wire is made of copper wire, which is cut and trimmed a few times, with high accuracy within 0.005 and good finish. The machine tool is about 20 times that of fast wire. Machining speed is between 0-100RMB3 per hour. Machine tools are the same as fast wire, except that the control cabinet is different, and it can be cut and repaired. There are about 20 thousand more machine tools than fast wire. Processing and fast spinning are not much more.

Now the market is not good, the large quantity can be lower, some can also be lower, and there will be a little difference between the wire repair and the two knives repair! In addition, there is a special shop for punching, regardless of medium wire and slow wire. 2 yuan is the beginning, and the workpiece with large thickness needs to be added, with high precision requirements, such as 0.2 and 0.3, and the punching will be high! In addition, the pricing is generally calculated as the line length, and then multiplied by the height, templates and small pieces, etc. There is no difference, there is no lowest price, only the line length! This is the situation here!

Reference answer: Some fast-moving wires can be 0*0035. A square mm wire cut is mostly calculated according to the cutting area. The number of knife repairs is higher, and the unit price is higher, and the single piece is 50 to 0 according to the frame die.